Linux 查看服务器最大网络带宽

wst321 · 发表于 2011-6-16 00:16:26

这是vps的
Settings for eth0:
      Supported ports: [ TP ]
      Supported link modes: 10baseT/Half 10baseT/Full
                              100baseT/Half 100baseT/Full
                              1000baseT/Full
      Supports auto-negotiation: Yes
      Advertised link modes:  10baseT/Half 10baseT/Full
                              100baseT/Half 100baseT/Full
                              1000baseT/Full
      Advertised auto-negotiation: Yes
      Speed: 1000Mb/s
      Duplex: Full
      Port: Twisted Pair
      PHYAD: 0
      Transceiver: internal
      Auto-negotiation: on
      Supports Wake-on: umbg
      Wake-on: g
      Current message level: 0x00000007 (7)
      Link detected: yes

greensnow · 发表于 2011-6-16 02:32:29

vps测试不行

381183401 · 发表于 2011-8-21 00:56:19

这个是网卡设置速度你的那个只说明网卡支持千M 并不一定给你的就是G口带宽 G口带宽是在路由/交换机限制的而且这个速度是可以自己设置的比如你怕客户超流量了可以限制到10M口当然客户也能自己改回来

iking · 发表于 2012-5-26 23:04:13

老贴啊，顶了

08host · 发表于 2012-5-27 09:33:17

VPS好像不可以，服务器可以

01801l · 发表于 2012-5-27 11:01:39

膜拜下管理员，学习了学习了

啪啪啪啪啪 · 发表于 2012-7-25 16:26:05

[ol]

Settings for eth0:

Supported ports: [ ]

Supported link modes: Not reported

Supported pause frame use: No

Supports auto-negotiation: No

Supported FEC modes: Not reported

Advertised link modes: Not reported

Advertised pause frame use: No

Advertised auto-negotiation: No

Advertised FEC modes: Not reported

Speed: Unknown!

Duplex: Unknown! (255)

Port: Other

PHYAD: 0

Transceiver: internal

Auto-negotiation: off

Link detected: yes[/ol]复制代码
Speed: Unknown! 哈哈哈哈

virus08 · 发表于 2012-11-26 20:08:35

现在服务器网口都是G口的，一般能跑到800－900M的带宽，跑不到1个G

jiuqimax · 发表于 2012-11-26 20:09:23

xjj · 发表于 2020-7-8 03:11:51

确实是这个命令只能查看网卡是多少M的百M 千M

		自动登录	找回密码
密码			立即注册