设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย Français

 找回密码
 立即注册
搜索
热搜: 活动 交友 discuz
查看: 7|回复: 0

Ikoula I3

[复制链接]

150

主题

873

回帖

2256

积分

金牌会员

积分
2256
发表于 2019-7-29 20:29:18 | 显示全部楼层 |阅读模式

和之前1欧云IP差不多都是109开头的。

[ol]
  • ----------------------------------------------------------------------
  • CPU model            : Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz
  • Number of cores      : 4
  • CPU frequency        : 3353.247 MHz
  • Total size of Disk   : 228.0 GB (4.2 GB Used)
  • Total amount of Mem  : 7685 MB (108 MB Used)
  • Total amount of Swap : 1023 MB (0 MB Used)
  • System uptime        : 0 days, 0 hour 5 min
  • Load average         : 0.11, 0.04, 0.02
  • OS                   : CentOS 7.6.1810
  • Arch                 : x86_64 (64 Bit)
  • Kernel               : 3.10.0-957.21.3.el7.x86_64
  • ----------------------------------------------------------------------
  • I/O speed(1st run)   : 395 MB/s
  • I/O speed(2nd run)   : 402 MB/s
  • I/O speed(3rd run)   : 433 MB/s
  • Average I/O speed    : 410.0 MB/s
  • ----------------------------------------------------------------------
  • Node Name                       IPv4 address            Download Speed
  • CacheFly                        205.234.175.175         102MB/s      
  • ^C
  • [/ol]复制代码

    新硬盘


    [ol]
  • smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.21.3.el7.x86_64] (local build)
  • Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  • === START OF INFORMATION SECTION ===
  • Device Model:     CT250MX500SSD1
  • Serial Number:    1919E200F21F
  • LU WWN Device Id: 5 00a075 1e200f21f
  • Firmware Version: M3CR023
  • User Capacity:    250,059,350,016 bytes [250 GB]
  • Sector Sizes:     512 bytes logical, 4096 bytes physical
  • Rotation Rate:    Solid State Device
  • Form Factor:      2.5 inches
  • Device is:        Not in smartctl database [for details use: -P showall]
  • ATA Version is:   ACS-3 T13/2161-D revision 5
  • SATA Version is:  SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
  • Local Time is:    Mon Jul 29 14:28:50 2019 CEST
  • SMART support is: Available - device has SMART capability.
  • SMART support is: Enabled
  • === START OF READ SMART DATA SECTION ===
  • SMART overall-health self-assessment test result: PASSED
  • General SMART Values:
  • Offline data collection status:  (0x80)        Offline data collection activity
  •                                         was never started.
  •                                         Auto Offline Data Collection: Enabled.
  • Self-test execution status:      (   0)        The previous self-test routine completed
  •                                         without error or no self-test has ever
  •                                         been run.
  • Total time to complete Offline
  • data collection:                 (    0) seconds.
  • Offline data collection
  • capabilities:                          (0x7b) SMART execute Offline immediate.
  •                                         Auto Offline data collection on/off support.
  •                                         Suspend Offline collection upon new
  •                                         command.
  •                                         Offline surface scan supported.
  •                                         Self-test supported.
  •                                         Conveyance Self-test supported.
  •                                         Selective Self-test supported.
  • SMART capabilities:            (0x0003)        Saves SMART data before entering
  •                                         power-saving mode.
  •                                         Supports SMART auto save timer.
  • Error logging capability:        (0x01)        Error logging supported.
  •                                         General Purpose Logging supported.
  • Short self-test routine
  • recommended polling time:          (   2) minutes.
  • Extended self-test routine
  • recommended polling time:          (  30) minutes.
  • Conveyance self-test routine
  • recommended polling time:          (   2) minutes.
  • SCT capabilities:                (0x0031)        SCT Status supported.
  •                                         SCT Feature Control supported.
  •                                         SCT Data Table supported.
  • SMART Attributes Data Structure revision number: 16
  • Vendor Specific SMART Attributes with Thresholds:
  • ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  •   1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
  •   5 Reallocated_Sector_Ct   0x0032   100   100   010    Old_age   Always       -       0
  •   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       277
  • 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       8
  • 171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  • 172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  • 173 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  • 174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2
  • 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   000   000   000    Pre-fail  Always       -       29
  • 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  • 184 End-to-End_Error        0x0032   100   100   000    Old_age   Always       -       0
  • 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  • 194 Temperature_Celsius     0x0022   065   060   000    Old_age   Always       -       35 (Min/Max 0/40)
  • 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  • 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  • 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  • 199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
  • 202 Unknown_SSD_Attribute   0x0030   100   100   001    Old_age   Offline      -       0
  • 206 Unknown_SSD_Attribute   0x000e   100   100   000    Old_age   Always       -       0
  • 210 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  • 246 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       63246979
  • 247 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1074557
  • 248 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       7051
  • SMART Error Log Version: 1
  • No Errors Logged
  • SMART Self-test log structure revision number 1
  • No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  • SMART Selective self-test log data structure revision number 1
  • SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  •     1        0        0  Not_testing
  •     2        0        0  Not_testing
  •     3        0        0  Not_testing
  •     4        0        0  Not_testing
  •     5        0        0  Completed [00% left] (0-65535)
  • Selective self-test flags (0x0):
  •   After scanning selected spans, do NOT read-scan remainder of disk.
  • If Selective self-test is pending on power-up, resume after 0 minute delay.
  • [/ol]复制代码
  • 回复

    使用道具 举报

    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    Archiver|手机版|小黑屋|Discuz! X

    GMT+8, 2025-12-21 17:00 , Processed in 0.017097 second(s), 4 queries , Gzip On, Redis On.

    Powered by Discuz! X3.5

    © 2001-2025 Discuz! Team.

    快速回复 返回顶部 返回列表